CADInLa 2022 Reference Manual

Conversion of Linetypes

USA Flag
German

Transcript:

In the case of CAD data exchange, the transmitted LineTypes rarely have an acceptable appearance for the data receiver. This can be caused by different drawing units or deviating from the ISO standard LineType definitions.

 

Using the dialog box, LineTypes can be easily converted.

 

Targeted LineType-transformations are also possible with our Properties Conversion Tables.

 

When selecting any type of line, please note that the LineType must be predefined in the DWG or DXF file. If this is not the case, this LineType must be inserted into the DWG/DXF file using the „Prototype drawing“ dialog box.

 

If an undefined LineType is selected, the program CADInLa automatically converts the LineType to the standard LineType: CONTINUOUS.

 

  • By selecting this fuction- the LineType of the objects are converted to any type of line

  • Here is a drop-down- List of all LineTypes that are defined in the DWG, DXF file (after analysis only).

  • By selecting this function- All LineTypes of the objects are assigned as the new LineType.

  • By selecting this function- All LineTypes, except CONTINUOUS Linetype, are assigned the new LineType.

  • By selecting this function- All elements with the LineType ByLayer are directly assigned to the LineType of the layer on which they are located.

Before Conversion:

After Conversion:

Conv of Linetypes 1
Arrow
Conv of Linetypes 1-1
Conv of Linetypes 2
Arrow
Conv of Linetypes 2-1

BacktoCAD Technologies, LLC

601 Cleveland St, Suite 310

Clearwater, FL 33755, USA

 

Email: bc-sales@cad-pdf.com
Phone: (727) 303 0383

© Copyright 2017 BackToCAD Technologies, LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, AzubiCAD, and CAD2Print are Trademarks of BackToCAD Technologies LLC. CADconv is a Trademark of Expert Robotics Inc.. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.